HMC-500SH
HMC-500SH
Origin:Taiwan
Model:HMC-500SH
High rigidity！ Stability！HMC features：
※ Machine frame adopts fully box-structured base to ensure long-term operation accuracy and stability of machine.
※ Feed rate is greatly uprate, while cutting capacity and machining speed are both raised. To be shorten the cycle time.
※ 3 axes configuration of pre-tension ball screw to eliminate thermal expansion. Direct-drive spindle assures the transmission accuracy and avoid lag error.
※ Horizontal machining center without APC. Space-saving and suitable for tailor-made production line.
※ Characteristics: stable, four slides with eight blocks supported the broad base to acquire the optimal dynamic balance during processing.
|
MODEL |
HMC-500SH |
|
Travel of X/Y/Z-axis (mm) |
520x600x550 |
|
Linear Guideway of X/Y/Z-axis |
X:35mm Y:45mm Z:25mm |
|
Ballscrews of X/Y/Z-axis |
Ø40xPH10 |
|
Distance from spindle nose to table |
160~710mm |
| Distance from spindle nose to table surface |
90~690mm |
|
SPINDLE |
|
|
Spindle taper |
BT-40 |
|
Spindle nose outer diameter |
65mm |
| Spindle speed | 10000rpm |
|
INDEX TABLE |
|
|
Table size |
500x500mm |
|
Indexing degree |
1°or5°(Opt.：0.001°) |
|
Max. loading capacity |
800kg |
|
FEEDRATE |
|
|
Rapid traverse speed of X/Y/Z-axis |
24/16/24 m/min |
|
Cutting feedrate of X/Y/Z-axis |
1-60 m/min |
|
AUTOMATIC TOOL CHANGER |
|
|
Tool capaciy |
24 |
|
Tool change type |
Arm type |
|
Max. diameter |
Ø80 |
| Max. tool weight | 7kg |
|
MOTOR |
|
|
Spindle motor |
7.5/11 kw |
|
Servo motor of X/Y/Z/B-axis |
3.0/3.0/.3.0/3.0 kw |
| Spindle oil cooler motor |
0.2kw |
| Centralized lubrication system | 0.02kw |
| Index Table Hydraulic motor | 0.75kw |
| Coolant motor (for tools/chips) | 0.75kw |
| Chip conveyor motor | 0.2kw |
| ATC motor | 0.37kw |
|
ACCURACY |
|
|
Positioning |
+/- 0.004 |
|
Repeatability |
+/- 0.003 |
|
MACHINE MEASUREMENT |
|
|
Dimension (WxHxD) |
3500x3900x3000mm |
|
Net weight |
8,200kg |
| Item |
Standard accessories |
Optional accessories |
| 1 |
3 axes telescopic cover |
Coolant thru spindle(CTS) |
| 2 |
Full-enclosed splash guard |
Transformer |
| 3 |
3 axes oil lubrication system with press-relief circuit |
Buzzer |
| 4 |
Screw type chip conveyor |
Air conditioner for electric cabinet |
| 5 |
Coolant system |
4th Roatry table & device |
| 6 |
Pneumatic fitting for 3-point built up |
4th axis preparation(servo,wiring only) |
| 7 |
Spindle air blast |
Spindle oil cooler |
| 8 |
Square type protective tube |
Wash down device |
| 9 | Adjustment tools and toolbox | Oil skimmer |
| 10 | Heat exchanger for electric cabinet |
Optical scale for 3 axes |
| 11 | Leveling pads and bolts | Tool setting probe |
| 12 | Working light |
Work piece measuring probe |
| 13 | M30 auto power off | Scraper type chip conveyor + bucket |
| 14 | RS232/USB/CF interface |
Oil mist collector |
| 15 | Warning light |
